Xerox PHASER 3635 Service Manual

2-33
Phaser 3635MFP
14-100
Status Indicator RAPs
Draft 4
14-100 CCD Lock RAP
14-100 The machine has detected a mechanical fault with the CCD module.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 3. Perform the following:
1. Raise the DADF. Check that the scanner lock, PL 14.10 Item 22 is completely unlocked.
2. Remove the scanner cover, PL 14.10 Item 20.
3. Check that the CCD module, PL 14.10 Item 8 moves freely from left to right.
4. Check the wiring between the CCD home sensor and CN5 on the Main PWB. If neces-
sary, install a new CCD home sensor, PL 14.10 Item 4.
5. Check the wiring between the scan motor, PL 14.10 Item 10 and CN4 on the Main PWB.
6. If necessary:
a. Install new components:
• Scanner motor drive assembly, PL 14.10 Item 6.
• CCD module, PL 14.10 Item 8.
• Scanner assembly, PL 14.10 Item 26.
b. Perform OF7 Main PWB Check RAP.

Xerox PHASER 3635 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	550 sheets
ADF Capacity	50 sheets
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
Functions	Print, Copy, Scan, Fax
Processor	360 MHz
Connectivity	Ethernet
Maximum Paper Size	8.5 x 14 inches
Scanner Resolution	Up to 600 x 600 dpi
Network Connectivity	Ethernet
Display	7-inch color touchscreen
Weight	49 lbs