Xerox PHASER 3635 - Fuser Warning Rap; Replace Fuser Rap

2-32
Phaser 3635MFP
10-500, 10-510
Draft 4
Status Indicator RAPs
10-500 Fuser Warning RAP
10-500 The machine has detected that the fuser assembly is near the end of its life.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Do not touch the fuser while it is hot.
1. No immediate action is necessary. Ensure that a replacement fuser assembly, PL 10.10
Item 1 is in stock.
10-510 Replace Fuser RAP
10-510 The machine has detected that the fuser assembly has reached the end of its life.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Do not touch the fuser while it is hot.
1. Install a new fuser assembly, PL 10.10 Item 1.