Xerox PHASER 3635 Service Manual

2-12
Phaser 3635MFP
03-600, 03-800
Draft 4
Status Indicator RAPs
03-600 Memory Failure RAP
03-600 The machine has detected a memory access failure.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 6. Perform the following:
1. Switch off the machine, then switch on the machine.
2. Remove, then reinstall the memory DIMM, PL 3.10 Item 10.
3. If necessary:
a. Install a new memory DIMM, PL 3.10 Item 10.
b. Perform OF7 Main PWB Check RAP.
03-800 Check HDD RAP
03-800 The machine has detected a fault with the hard disk drive (HDD).
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 5. Perform the following:
1. Switch off the machine, then switch on the machine.
2. Check the wiring between the hard disk drive and the Main PWB.
3. If necessary:
a. Install a new hard disk drive, PL 3.10 Item 16.
b. Perform OF7 Main PWB Check RAP.

Xerox PHASER 3635 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	550 sheets
ADF Capacity	50 sheets
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
Functions	Print, Copy, Scan, Fax
Processor	360 MHz
Connectivity	Ethernet
Maximum Paper Size	8.5 x 14 inches
Scanner Resolution	Up to 600 x 600 dpi
Network Connectivity	Ethernet
Display	7-inch color touchscreen
Weight	49 lbs