Modifying the Default Settings for the Copy
App
SSeettttiinngg DDeeffaauullttss ffoorr PPaappeerr MMaannaaggeemmeenntt
1. In the Embedded Web Server, log in as administrator, then click Apps→Copy.
2. To change the default setting for size of original documents, in the Defaults area, click Original
Size. Enter the new setting for default original size, then click OK.
Note: You can edit the sizes for the presets. For details, refer to Configuring Presets for
Original Page Sizes.
3. To change the default orientation of portrait or landscape original documents, in the Defaults
area, click Original Orientation. Select an option, then click OK.
4. For color devices, to change the default print color, in the Defaults area, click Output Color. Select
an option, then click OK.
5. To change the default behavior for 2-sided copying, in the Defaults area, click 2-Sided Copying.
Select an option, then click OK.
6. To change the default paper tray, in the Defaults area, click Paper Supply. Select an option, then
click OK.
7. To specify the printer output as collated or uncollated, in the Defaults area, click Output. Select an
option, then click OK.
8. To print a sample of a copy job for inspection before beginning the job, in the Defaults area, click
Sample Copy. Select On, then click OK.
9. To specify a paper tray for cover paper for a print job, in the Defaults area, click Covers Tray.
Select an option, then click OK.
Note: The Covers Tray setting is only available on printers that have a hard drive
installed.
10. To specify a paper tray for cover paper for booklets, in the Defaults area, click Booklet Covers
Tray. Select an option, then click OK.
Note: The Booklet Covers Tray setting is available only on printers that have a hard
drive installed.
SSeettttiinngg DDeeffaauullttss ffoorr IImmaaggee QQuuaalliittyy
1. In the Embedded Web Server, log in as administrator, then click AppsCopy.
2. To change the default for basic image quality, in the Defaults area, click Original Type. Select an
option, then click OK.
Note: The setting Original Type Presets provides more adjustments to the Original
Type setting. For details, refer to Setting Policies for Image Management.
3. To change the default level to lighten or darken an image, in the Defaults area, click Lighten/
Darken. Select an option, then click OK.
114
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Copying
To Next Page
Loading...
