Xerox VersaLink Series User Manual

– Click Authentication Method, then select the authentication method for your wireless
network.
– For Root Certificate, upload a Root Certificate.
– Type values for EAP Identity, Login Name, and Password.
3. Click OK.
4. For the new settings to take effect, restart the printer.
5. Disconnect the printer from the wired network.
CCoonnffiigguurriinngg WWii--FFii aatt tthhee CCoonnttrrooll PPaanneell
To enable Wi-Fi at the control panel:
1. At the printer control panel, press the Home button.
2. Log in as administrator.
3. Touch Device→Connectivity→Wi-Fi.
4. To enable Wi-Fi, for Wi-Fi, touch the enable toggle button.
5. In the list of available Wi-Fi networks, touch the desired network.
6. If needed, type the password to use to log in to the network.
7. To select a Wi-Fi frequency band, touch Wi-Fi Band, then select an option.
8. Touch OK.
To configure Wi-Fi manual setup at the control panel:
1. At the printer control panel, press the Home button.
2. Log in as administrator.
3. Touch Device→Connectivity→Wi-Fi.
4. Ensure that the Wi-Fi toggle button is enabled.
5. Touch Manual Setup.
6. In the first field, type a name for the Wi-Fi network.
7. Touch Network Type, then select an option.
8. Touch Security, then select an option.
9. Touch Wi-Fi Protected Setup (WPS), then select an option.
10. Touch OK.
CCoonnffiigguurriinngg WWii--FFii bbyy CCoonnnneeccttiinngg DDiirreeccttllyy ttoo tthhee
PPrriinntteerr
You can configure the settings for a wireless network by connecting a computer directly to the printer,
rather than over a general wired network.
1. Ensure that the printer is not connected to a wired Ethernet network.
2. Restart the printer.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
29
Network Connectivity

Xerox VersaLink Series Specifications

General

Brand	Xerox
Model	VersaLink Series
Category	Printer
Language	English