Xerox VersaLink Series User Manual

5. When prompted with an acknowledgement message about the printer restarting, touch Continue.
Note: The printer restarts later in the procedure.
6. One at a time, touch the fields for IPv4 Address, IP Gateway Address, and Network Mask Address,
then type the IP addresses into the fields. After each address, touch Enter.
7. Touch Restart.
The printer restarts.
CCoonnffiigguurriinngg IIPP SSeettttiinnggss iinn tthhee EEmmbbeeddddeedd WWeebb SSeerrvveerr
If your printer has a valid network address, you can configure TCP/IP settings in the Embedded Web
Server. For details, refer to Assigning a Network Address.
SSeelleeccttiinngg BBeettwweeeenn IIPPvv44 aanndd IIPPvv66 PPrroottooccoollss
You can configure the printer to communicate with networks that use IPv4, IPv6, or both.
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Connections area, click Ethernet.
3. In the Common area, click Edit.
4. For Host Name, type the name to appear for the printer.
5. Click IP Mode, then select an option.
Note: The Dual Stack setting allows the router to assign IPv4 and IPv6 IP addresses, as needed.
1. When in Dual Stack mode, you can give priority to the IPv6 address for resources. For IPv6 Priority
over IPv4 at Domain Name Resolution, enable the toggle button.
2. Click OK.
CCoonnffiigguurriinngg IIPPvv44 SSeettttiinnggss
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Connections area, click Ethernet.
3. In the IPv4 area, click Edit.
46
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Network Connectivity

Xerox VersaLink Series Specifications

General

Brand	Xerox
Model	VersaLink Series
Category	Printer
Language	English