January 2016
6-73
WorkCentre 4150/4250/4260WorkCentre 4150/4250/4260WorkCentre Work-
dC612
General Procedures and Information
dC612 Print Test Pattern (4265)
Purpose
The purpose is to allow the CSE to print out any of several available test patterns from any of
the machine’s paper trays, in simplex or duplex mode.
Procedure
1. Enter diagnostics, GP 1.
2. Select Copier Diagnostics.
3. Select dC 612 Print Test Pattern.
4. The dC 612 Print Test Pattern screen is displayed. It contains the following selections:
• Test Pattern - Eight test patterns are available.
• Tray - Tray 1, Tray 2, Tray 3 or the Bypass Tray may be selected.
• Plex Mode - Simplex or Duplex may be selected.
• Number of Copies
5. Select Start to print out the test pattern.
To Next Page
Loading...
Need help?
General
