Xerox WORKCENTRE PE 220 User Manual

General Procedures and Information
6-22 11/05 Workcentre PE 220
7) Motor Driver speed & method
(a) FAX Transmission
- Normal Mode: 2000 pps
- Fine Mode: 1000 pps
- Super Fine Mode: 667 pps
(b) Copy Job: 667 pps, 2-2
- max(30sheets): 50gf
- min(1sheets): 20gf
8) Document Detect sensor
(a) Type: Photo interrupt
(b) Position: ADF PBA
(c) LED - max current: 50mA
- max voltage: 3.3V
(d) Output - Logic "H": No Paper
- Logic "L": Paper
(e) Lever-Sensor DOC: ADF Lower Torsion Spring
9) Regi Detect sensor
(a) Type: Photo interrupt
(b) Position: ADF PBA
(c) LED - max current: 50mA
- max voltage: 3.3V
(d) Output - Logic "H": No Paper
- Logic "L": Paper
(e) Lever-Sensor DOC: ADF Lower Torsion Spring
10) Document Scan sensor
(a) Type: Photo interrupt
(b) Position: ADF PBA
(c) LED: - Max current: 50mA
- Max Voltage: 3.3V
(d) Output - Logic "H": Off (No Position), No Paper
- Logic "L": On (Doc Position), Paper
(e) LEVER - SENSOR SCAN: Scan Lower Torsion Spring

Xerox WORKCENTRE PE 220 Specifications

General

Brand	Xerox
Model	WORKCENTRE PE 220
Category	All in One Printer
Language	English