Xerox WorkCentre Pro 423 - Page 154

WorkCentre Pro 423/428 2-122 CHAPTER 2 TROUBLESHOOTING
03/02 Level 2 Troubleshooting
E8-2 DUPLEX Jam (BSD 10.4)
Chain Link Codes for Check
l [Chain8 Func31] DUPLEX SENSOR
l [Chain8 Func38] DUPLEX MOTOR
l [Chain8 Func51] EXIT GATE SOLENOID
l [Chain8 Func63] EXIT MOTOR
l [Chain10 Func23] FUSER EXIT SENSOR
Check Items
l FUSER EXIT SENSOR defect
l FUSER EXIT SENSOR actuator broken or missing
l EXIT GATE SOLENOID defect
l EXIT GATE operation error
l EXIT MOTOR defect
l EXIT ROLL rotation error
l DUPLEX MOTOR defect
l DUPLEX ROLL rotation error
l DUPLEX SENSOR defect
l DUPLEX SENSOR actuator broken or missing
l Transport error due to foreign matter on paper path
l ROLL dirty or worn
C1-3 TRAY1 Misfeed (BSD 8.1 8.5)
Chain Link Codes for Check
l [Chain4 Func1] MAIN MOTOR
l [Chain8 Func5] REGI SENSOR
l [Chain8 Func12] TRAY1 FEED CLUTCH
Check Items
l MAIN MOTOR defect
l FEED CLUTCH defect
l FEED ROLL rotation error
l REGI SENSOR defect
l REGI SENSOR actuator broken or missing
l Transport error due to foreign matter on paper path
l ROLL dirty or worn
C2-2 TRAY2 Misfeed (BSD 8.1 8.3 8.4)
Chain Link Codes for Check
l [Chain4 Func1] MAIN MOTOR
l [Chain8 Func2] FEED MOTOR
l [Chain8 Func6] T/A ROLL2 SENSOR
l [Chain8 Func13] TRAY2 FEED CLUTCH
Check Items
l FEED MOTOR defect
l FEED CLUTCH defect
l FEED ROLL rotation error
l T/A ROLL rotation error
l MAIN MOTOR defect
l T/A ROLL2 SENSOR defect
l SENSOR actuator broken or missing
l Transport error due to foreign matter on paper path
l ROLL dirty or worn
C2-3 TRAY2 Misfeed (BSD 8.4 8.5)
Chain Link Codes for Check
l [Chain4 Func1] MAIN MOTOR
l [Chain8 Func5] REGI SENSOR
l [Chain8 Func6] T/A ROLL2 SENSOR
l [Chain8 Func11] T/A ROLL CLUTCH
Check Items
l T/A ROLL CLUTCH defect
l T/A ROLL rotation error
l T/A ROLL2 SENSOR defect
l MAIN MOTOR defect
l REGI SENSOR defect
l SENSOR actuator broken or missing
l Transport error due to foreign matter on paper path
l ROLL dirty or worn
C3-1 TRAY3 Misfeed (BSD 8.1 8.4)
Chain Link Codes for Check
l [Chain8 Func2] FEED MOTOR
l [Chain8 Func7] T/A ROLL3 SENSOR
l [Chain8 Func14] TRAY3 FEED CLUTCH
Check Items
l FEED MOTOR defect
l FEED CLUTCH defect
l FEED ROLL rotation error
l T/A ROLL3 SENSOR defect
l SENSOR actuator broken or missing
l Transport error due to foreign matter on paper path
l ROLL dirty or worn