WorkCentre Pro 423/428 8-48 CHAPTER 8 ACCESSORIES
03/02 8.20 Token Ring
8.20 Token Ring
8.20.1
Product Outline
Install the interface port for Token Ring
• This kit is installed on the Printer equipped machine.
• When installing this kit, the following kits are necessary. Prepare the kits and install
them at the beginning.
(1) Token Ring Installation Kit (Product Code: EL200079)
8.20.2 Produce Code
Token Ring: EL200043
8.20.3 Installation Procedure
1. Check the accessories. (Figure-1)
1. Token Ring Interface Board
1) Interface Board.......1
2) User Guide.............1
2. Token Ring Installation Kit
a. Mother PWB Assembly 1
b. Screw .....................2
(Figure-1) j0hn8099
2. Turn the main unit power off.
On printer or Fax-equipped machines, ensure that outstanding jobs have cleared
before servicing or interrupting the power to the machine as follows:.
• FAX equipped machines: Ensure that the “Job in Memory” indicator on the control
panel goes out. Press “Job Status:Stop” button and confirm that the job has cleared
from the “Current Jobs” folder.
• Printer machines: Ensure that “Ready to print or fax” is indicated on the printer
control panel.
WARNING
Switch off the machine and disconnect the power cord.
3. Disconnect the Cable and remove the Screws (2). (Figure-2)
(Figure-2) j0hn8104
To Next Page
Loading...
