WorkCentre Pro 423/428 8-56 CHAPTER 8 ACCESSORIES
03/02 8.22 Stamp Kit (Red)
8.22 Stamp Kit (Red)
8.22.1
Product Outline
This kit stamps each document sheet on a DADF-mounted machine to check a multi-
sheet feed occurrence.
- This kit can be installed only on a machine with a FAX function.
8.22.2 Product Code
Stamp Kit (Red): WF34
8.22.3 Installation Procedure
1. Check the accessories. (Figure-1)
1) Stamp Solenoid..............................................1
2) Stamp Replacement Kit (Consumable) ..........1
- Spare Stamps (3)
-Pin (1)
(Figure-1) j0hn8062
2. Turn the main unit power off.
On printer or Fax-equipped machines, ensure that outstanding jobs have cleared
before servicing or interrupting the power to the machine as follows:.
• FAX equipped machines: Ensure that the “Job in Memory” indicator on the control
panel goes out. Press “Job Status:Stop” button and confirm that the job has cleared
from the “Current Jobs” folder.
• Printer machines: Ensure that “Ready to print or fax” is indicated on the printer
control panel.
WARNING
Switch off the machine and disconnect the power cord.
3. Open the DADF Top Cover and Chute. (Figure-2)
(Figure-2) j0hn8063
To Next Page
Loading...
