Xerox WorkCentre Pro 423 - Internet FAX; Product Outline; Product Code; Installation Procedure

WorkCentre Pro 423/428 8-46 CHAPTER 8 ACCESSORIES
03/02 8.19 Internet FAX
8.19 Internet FAX
8.19.1
Product Outline
This kit is used to enable Internet FAX function.
- This kit is installed on the followings:
DocuCentre230/280FS(FS-DD) (FX)
235/285FS-DD (FXA)
235FS, 285FS-DD (FXK)
285FS-DD(PRC)
- When installing this kit, the following kits are necessary. Prepare the kits and install them
at installation.
(1) Printer HDD (Product Code: EL200119)
(2) 64MB SDRAM (Product Code: EL200120)
8.19.2 Product Code
Internet FAX: EL200121 (FX)
: EL200149 (FXA, FXK, TFX)
: EL200195 (PRC)
8.19.3 Installation Procedure
1. Check the accessories. (Figure-1)
1) IFAX ROM (ROM1).............1(FX, FXA, FXK, TFX, PRC)
2) Label...................................1(FX)
3) User Guide (Book) ..............1(FX, PRC)
4) User Guide (CD-ROM)........1(FXA, FXK, TFX)
(Figure-1) j0hn8091
2. Turn the main unit power off.
On printer or Fax-equipped machines, ensure that outstanding jobs have cleared
before servicing or interrupting the power to the machine as follows:.
• FAX equipped machines: Ensure that the “Job in Memory” indicator on the control
panel goes out. Press “Job Status:Stop” button and confirm that the job has cleared
from the “Current Jobs” folder.
• Printer machines: Ensure that “Ready to print or fax” is indicated on the printer
control panel.
WARNING
Switch off the machine and disconnect the power cord.
3. Remove the Screw and ESS Cover.
4. Loosen the Screw and remove the ROM Cover.