Xerox WorkCentre Pro 423 - Plug;Jack Information; How to Use Plug;Jack Information; Plug;Jack Index

WorkCentre Pro 423/428 7-2 CHAPTER 7 ELECTRICAL WIRING DIAGRAMS
03/02 7.1 Plug/Jack Information
 Plug/Jack Information
7.1.1 How to Use Plug/Jack Information
• To know the connector location, see the Fig. No. and Item No. listed in Section 7.1.2,”
Plug/Jack Index,” and Figures in Section 7.2, “Plug/Jack Location Diagrams.”
• The P/J numbers in Section 7.1.2, “Plug/Jack Index,” are expressed in the following four
ways:
• ”J250” indicates Jack 250.
• ”P250” indicates Plug 250.
• Number without P or J indicates both Plug and Jack.
• CN 1 indicates Connector 1.
j0hn7000
7.1.2 Plug/Jack Index
P/J No. Fig. No. Item No. Remarks (destination)
17.2.121Power Unit
17.2.146ESS
J1 7.2.13 8 MF Box
P1 7.2.14 7 ESS
2 7.2.12 10 Power Unit
27.2.219DADF
J2 7.2.13 7 MF Box
3 7.2.12 14 Power Unit
37.2.148ESS
3A 7.2.13 18 MF Box
J3B 7.2.14 7 ESS
3C 7.2.20 17 Option Box
37.2.215DADF
P4 7.2.12 13 Power Unit
47.2.214DADF
5 7.2.12 11 Power Unit
57.2.212DADF
67.2.211
77.2.2112
8 7.2.12 12 Power Unit
87.2.2113DADF
97.2.2114
10 7.2.12 9 Power Unit
P10 7.2.21 11 DADF
11 7.2.19 3
P11 7.2.21 3
12 7.2.5 14
J13 7.2.15 25
P13 7.2.25 6
14 7.2.15 8
15 7.2.14 12
J16 7.2.15 24
51 7.2.14 4
100 7.2.5 11
101 7.2.6 1
102 7.2.8 2
103 7.2.8 1
105 7.2.15 6
106 7.2.4 4
J107 7.2.10 4
P107 7.2.11 4
108 7.2.11 1
109 7.2.7 1