WorkCentre Pro 423/428 8-4 CHAPTER 8 ACCESSORIES
03/02 8.2 Upgrade Kit A(4MB) FX Only
8.2 Upgrade Kit A(4MB) FX Only
8.2.1
Product Outline
This kit makes A4 Page Memory available for 90-degree rotation and other functions
using Memory. Up to A3 Page Memory is available.
8.2.2 Product Code
Upgrade Kit A (4MB): WF11
8.2.3 Installation Procedure
WARNING
Switch off the machine and disconnect the power cord.
1. Check the accessories. (Figure-1)
1) Page Memory PWB……………. 1
(Figure-1) j0hn8003
2. Remove the Screws (3) and the Rear Cover.
3. Remove the Screws (7) and the Electrical Cover.
4. Install the Page Memory PWB. (Figure-2, Figure-3)
CAUTION
Electric parts may be damaged by static electricity. Be sure to wear a wrist strap when handling
electric parts. If no wrist strap is available, touch a metal section before work to eliminate static
electricity as far as possible.
- Install the Page Memory PWB on A4MEM-1 of MCU/SW.
- When installing two Page Memory PWBs, install the second one to A4MEM-2.
(Figure-2) j0hn8004
To Next Page
Loading...
