Xerox WorkCentre Pro 423 - Page 217

03/02 How to use the Diagnostic C/E Mode
WorkCentre Pro 423/428 2-185 CHAPTER 2 TROUBLESHOOTING
Chain Function Item Content Default Description
Access
by
57 15 PSTN0 Network Service Contract 0: No Number Display/Modem Dial-
in
1: Number Display
2: Modem Dial-in n
00
57 16 PSTN1 Network Service Contract 0: No Number Display/Modem Dial-
in
1: Number Display
2: Modem Dial-in n
00
57 17 PSTN2 Network Service Contract 0: No Number Display/Modem Dial-
in
1: Number Display
2: Modem Dial-in n
00
57 18 ISDN Network Service Contract 0: No Number Display/Modem Dial-
in
1: Number Display
2: Modem Dial-in n
00
57 20 Number of redials 0 to 255 times(0:No redialing made)
(1step=1 redial)
05 At the auto send, when the remote terminal does not answer due to the busy
line, release the line and redial for send again. The data specifies the number
of redialings for such a case. 0 for redialing means that no redialing will be
made.
User
57 21
Interval between redials()
1 to 255 min. (1step=1 min.) 01 The data specifies the time between the release of line at auto send and the
first redialing. When more than 6 redialings have been set up, the data
specifies the time between the fifth and sixth redialings.
User
57 22 Interval between redials(2) 1 to 255 min. (1step=1 min.) 01 The data specifies the time between the line release at the first redialing and
the second. When more than 6 redialings have been set up, the data specifies
the time between the sixth and seventh redialings.
User
57 23 Interval between redials(3) 1 to 255 min. (1step=1 min.) 01 The data specifies the time between the line release at the second redialing
and the third. When more than 6 redialings have been set up, the data
specifies the time between the seventh and eighth redialings.
User
57 24 Interval between redials(4) 1 to 255 min. (1step=1 min.) 01 The data specifies the time between the line release at the third redialing and
the fourth. When more than 6 redialings have been set up, the data specifies
the time between the eighth and ninth redialings.
User
57 25 Interval between redials(5) 1 to 255 min. (1step=1 min.) 01 The data specifies the time between the line release at the fourth redialing and
the fifth.
User
57 26 Restriction of Redial Parameter Change
by User
0:Not restricted 1:Restricted 00
57 30 iFAX(Internet Fax) Function 0: Not supported 1: Supported 00
57 31 iFAX(Internet Fax) Function 0: Not supported 1: Supported 00
57 32 iFAX(Internet Fax) Function 0: Not supported 1: Supported 00
57 33 iFAX(Internet Fax) Function 0: Not supported 1: Supported 00