03/02 How to use the Diagnostic C/E Mode
WorkCentre Pro 423/428 2-207 CHAPTER 2 TROUBLESHOOTING
Chain Function Item Content Default Description Access by
R/W 455 1300Hz Call 00:Off 01:On Sets up whether or not to receive a call without the sound of a bell at
F network.
Select “00” when the machine receives a call without the sound of a
bell, but because of noise.
CE
R/W 2DE Alerting time after dialling(NTT) 0 to 255 sec.
R/W 2E4 Alerting time after dialling(PBX) 0 to 255 sec.
R/W 5DC ISDN T310 timer 7 to 255 sec. 1step=1 sec.
R/W 5E6 ICM trace layer type 05:Layer 3 07:Layer 2+3
0F:Layer 1+2+3
R/W 60F V8 capability 00:Off 01:On
To Next Page
Loading...
