WorkCentre Pro 423/428 8-30 CHAPTER 8 ACCESSORIES
03/02 8.12 G3 Port
CAUTION
Electric parts may be damaged by static electricity. Be sure to wear a wrist strap when handling
electric parts. If no wrist strap is available, touch a metal section before work to eliminate static
electricity as far as possible.
1) Install the Upper Bracket.
2) Tighten the screws (2).
(Figure-2) j0hn8033
7. Install the Lower Bracket. (Figure-3)
1) Install the Lower Bracket.
2) Tighten the screws (2).
(Figure-3) j0hn8034
8. Install the Option Box. (Figure-4)
1) Install the Screws (3) on the Stud.
2) Install the Option Box.
3) Tighten the screws (3).
4) Tighten the screw.
(Figure-4) j0hn8035
9. Connect the Connectors (2) and Flat Cable. (Figure-5)
1) Connect the Connectors (2).
2) Connect the Flat Cable.
(Figure-5) j0hn8036
To Next Page
Loading...
