WorkCentre Pro 423/428 9-2 CHAPTER 9 BSD (Block Schematic Diagrams
03/02 Contents
CHAIN9 XEROGRAPHICS
CH9.1 CRU SETTING AND DRIVING 9-53
CH9.2 CRU CONTROL 9-54
CH9.3 MONITORING 9-55
CHAIN10 FUSING AND COPY TRANSPORTATION
CH10.1 FUSING 9-56
CH10.2 FUSING HEAT CONTROL 9-57
CH10.3 FUSER EXIT TRANSPORTATION 9-58
CH10.4 DUPLEX TRANSPORTATION 9-59
CH10.5 EXIT DRIVE CONTROL 9-60
CH10.6 DUPLEX DRIVE CONTROL 9-61
CH10.7 OFFSET MOTOR DRIVE CONTROL (OPTION) 9-62
CH10.8 MONITORING 9-63
CHAIN12 FINISHER
CH12.1 FINISHER DC POWER GENRATION AND SWITCHING 9-64
CH12.2 FINISHER DOCKING AND COVER SENSING 9-65
CH12.3 FINISHER FEED IN AND REVERSE DRIVE CONTROL 9-66
CH12.4 FINISHER TRANSPORT DRIVE CONTROL 9-67
CH12.5 FINISHER TRANSPORTATION 9-68
CH12.6 RECEIVING TRAY TRANSPORTATION 9-69
CH12.7 EXIT UNIT CONTROL 9-70
CH12.8 COMPILING 9-71
CH12.9 STAPLE POSITIONING 9-72
CH12.10 STAPLE CONTROL 9-73
CH12.11A RECEIVING TRAY ELEVATOR CONTROL (1 OF 2) 9-74
CH12.11B RECEIVING TRAY ELEVATOR CONTROL (2 OF 2) 9-75
CH12.12A MONITORING (1 OF 2) 9-76
CH12.12B MONITORING (2 OF 2) 9-77
CHAIN19 ESS
CH19.1 ESS DC POWER GENERATION 9-78
CH19.2 ESS (FAX MODULE) 9-79
CH19.3 ESS (PRINTER) 9-80
CH19.4 BLOCK DIAGRAM (FAX) 9-81
CH19.5 MONITORING 9-82
To Next Page
Loading...
