102
In any control mode (panel control, terminal control, communication
control), the terminal can be used to slow down the frequency
converter, and the deceleration time is fixed as deceleration time 4.
When the terminal is valid, inverter reverse rotation is prohibited
The running time is cleared
When the terminal is valid, the inverter operation time is cleared.
This function needs to be matched and used with the timing
operation (PC-28) and the current operation time (PC-29).
Two wire / three wire
switching
Used to switch between two-wire and three-wire mode
Four multi-segment command terminals can be combined into 16 states, each of which corresponds to 16
command settings. The details are as follows:
To Next Page
Loading...