Yaesu FT1DR - Set Mode Option List (Part 3)

97
Functions Used As Needed
Set Mode
Set mode option No./
setting Item
Description of function
Setting Item
(Bold letters: Default)
Reference
page
4-3 DCS INVERSION Select a combination of DCS
inversion codes in terms of
communication direction.
RX (Reception):
-NORMAL (Homeomorphic) /
INVERT (Inversion) /
BOTH (Both Phase) /
NORMAL (Homeomorphic)
TX (Transmission):
-NORMAL (Homeomorphic) /
NORMAL (Homeomorphic)
NORMAL (Homeomorphic)
INVERT (Inversion)
117
4-4 DTMF MODE Set the transmission of DTMF
code registered to a DTMF
memory channel, DTMF code
transmission delay time, and
DTMF code transmission speed.
MODE: MANUAL / AUTO
DELAY: 50ms / 250ms / 450ms /
750ms / 1000ms
SPEED: 50ms / 100ms
81
4-5 DTMF SELECT Set a DTMF auto dialer channel
and code (16 characters).
1 to 10 79
4-6 PAGER Turn on/off the pager answerback
function and specify a personal
code (transmission/reception).
ANS-BACK: OFF / ON
CODE-RX: 01 02 to 50 49 05 47
CODE-TX: 01 02 to 50 49 05 47
90
4-7 PR FREQUENCY Set a non-communication
squelch.
300 Hz to 3000 Hz 1600 Hz 118
4-8 SQL LEVEL Select a squelch level. Level 0 to Level 15 Level 1 119
4-9 SQL S-METER Select an S-meter squelch level. OFF / LEVEL 1 to LEVEL 9 119
4-10 SQL
EXPLANATION
Set a separate squelch type for
reception and transmission.
OFF / ON 121
4-11 SQL TYPE Select a squelch type. OFF / TONE / TONE SQL / DCS /
REV TONE / PR FREQ / PAGER
84
4-12 TONE SQL FREQ Set a tone frequency. 67.0 Hz to 254.1 Hz 100 Hz 85
4-13 TONE-SRCH Set the audio output during tone
search.
Turn the muting function on/off
and select a tone search speed.
MUTE: ON / OFF
SPEED: FAST / SLOW
121
4-14 WX ALERT Enables/Disables the Weather
Alert Feature.
OFF / ON 122
5 SCAN
5-1 DW TIME Set the priority memory channel
monitoring interval.
0.1 SEC to 10 SEC 5 SEC 122
5-2 SCAN LAMP Set the scan lamp to light or not
when scanning stops.
ON / OFF 123
5-3 SCAN RE-START Set the scanning restart time. 0.1 SEC to 10 SEC 2 SEC 123
5-4 SCAN RESUME Set the scan stop mode. SCAN:
BUSY / HOLD / 2sec to 10sec
5sec
DW:
BUSY / HOLD / 2sec to 10sec
59
5-5 SCAN WIDTH Set the scan mode. VFO: ALL / BAND
MEMORY: ALL CH / BAND
124
FT1DRDEEng.indb97FT1DRDEEng.indb97 13/06/2815:1613/06/2815:16