6D81G11
3-14
1
2
3
4
5
6
7
8
9
General
3
Checking the anodes
1. Check the anodes and trim tab for
scales, grease, or oil. Clean if necessary.
CAUTION:
Do not oil, grease, or paint the anodes or
the trim tab, otherwise they will be ineffec-
tive.
NOTE:
If it is necessary to disassemble the outboard
motor to check an anode, refer to the applica-
ble disassembly procedure in this manual.
2. Replace the anodes or trim tab if exces-
sively eroded.
Checking the battery
1. Check the battery electrolyte level. If the
level is at or below the minimum level
mark
a
, add distilled water until the level
is between the maximum and minimum
level marks.
S6D83170
S6D83210
S62Y3640
S69J3620
a
Lower unit / General
To Next Page
Loading...
