Yamaha FT60D - Removing the Cylinder Head

POWR
Power unit
5-23
6C13G11
Removing the cylinder head
1. Remove the cylinder head cover.
2. Remove the cylinder head bolts in the
sequence shown.
CAUTION:
Do not scratch or damage the mating sur-
faces of the cylinder head and cylinder
block.
3. Remove the oil pump assembly
1
.
4. Remove the rocker arm assembly
2
and rocker arm shaft
3
.
5. Remove the retaining bolt
4
, then the
camshaft
5
.
S6C15390
S6C15410
2
3