Yamaha FT60D - Checking the Engine Start Switch and Engine Stop Lanyard Switch; Checking the Cooling Water Pilot Hole

6C13G11
1-16
1
2
3
4
5
6
7
8
9
Checking the engine start switch and
engine stop lanyard switch
1. Check that the engine starts when the
engine start switch is turned to START.
2. Check that the engine turns off when the
engine start switch is turned to OFF.
È
Tiller handle model
É
Remote control model
3. Check that the engine turns off when the
engine stop lanyard switch is pushed or
engine stop lanyard is pulled from the
engine stop lanyard switch.
È
Tiller handle model
É
Remote control model
Checking the cooling water pilot
hole
1. Check that cooling water is discharged
from the cooling water pilot hole.
S6C11100
1
È
S60V1070
OFF
ON
START
É
È
É
Predelivery checks