Yamaha QL5 - Page 39

Input channels
Reference Manual
39
 LR-MONO
The signals sent to both channels are temporarily set as mono signals.
 Setting procedure
If a stereo input channel is selected, the SELECTED CHANNEL VIEW screen will appear as
shown below.
1 LR-MONO SELECT field
Select one of the four buttons. The button you select lights up, and the others go off.
If a stereo input channel is selected, the OVERVIEW screen will appear as shown below.
2 LR-MONO SELECT button
This a toggle button. The setting switches each time the button is pressed.
STEREO IN Lch
STEREO IN Rch
STEREO R
STEREO L
ON
ON
PAN/BAL
PAN/BAL
1
Normal STEREO setting
L-MONO
R-MONO
LR-MONO
2