4-60
Operation
4
10. “PROGRAM” mode
10.3.4 Copying a program
A program in the directory can be copied under a different name.
[Procedure]
1) In “PROGRAM>DIR” mode, use the cursor (↑/↓) keys to select the program to be
copied.
2) Press the
F 6
(COPY) key to enter “PROGRAM>DIR>COPY” mode.
The message “Enter program name >“ appears on the guideline along with an edit
cursor.
3) Enter a new program name.
Press the
ESC
key if you want to cancel this operation.
Fig. 4-10-21 Copying a program
PROGRAM >DIR <TEST1 >
No. RW/RO
1 TEST1 55 952 RW
2 *TEST2 50 907 RW
3 PARTS100 38 843 RW
4 TEST100 100 1968 RW
Enter program name >TEST3
Name Line Byte
4) Press the key to make a copy.
n
NOTE
Program names can be up to 8
characters and consist of a
combination of alphanumeric
characters (0 to 9, A to Z) and
underscores ( _ ).
To Next Page
Loading...
Need help?
General
