SETUP
Setting various functions (Setup menu)
En 127
■
Displaying the video on the TV monitor in
Zone2, Zone3 or Zone4
Monitor Out Assign
Sets the component video, S-video or video (HDMI OUT/ZONE
OUT) jacks for the main zone, Zone2, Zone3 or Zone4 use. When
using one of HDMI OUT jacks to connect to the TV monitor in the
main zone, jacks of MON.OUT can be used for another monitor for
Zone2, Zone3 or Zone4.
■
Setting the party mode
Party Mode Set
In party mode, the main zone sources can be played in Zone2
,
Zone3 and Zone4 simultaneously (☞p. 155). The party mode
function can be enabled or disabled individually for Zone2, Zone3
and Zone4.
Target : Zone2
Target : Zone3
Target : Zone4
Main (Default) Outputs the video signals of the main zone operation
status.
Zone2 J1 Outputs the video signals for Zone2.
Zone3 J1 Outputs the video signals for Zone3.
Zone4 Outputs the video signals for Zone4.
Disable Disables the party mode function in Zone2.
Enable (Default) Enables the party mode function in Zone2.
Disable Disables the party mode function in Zone3.
Enable (Default) Enables the party mode function in Zone3.
Disable Disables the party mode function in Zone4.
Enable (Default) Enables the party mode function in Zone4.
J
1 : The Option menu and content window can be displayed on the monitor for
Zone2 and Zone3. For details on features of Zone OSD, refer to “Features of
the Zone2/Zone3 OSD” (☞
p. 153).
To Next Page
Loading...
Need help?
General