YASKAWA CIPR-GA50C series Technical Manual

4.5 Start-up Procedures
134 YASKAWA SIEPC71061753C GA500 Technical Manual
Figure 4.14 PM Motor Auto-Tuning and Test Run Procedure
*1 For Yaskawa PM motors (SMRD, SMRA-series, or SSR1-series), set E5-01 (Motor Code). For PM motors from a different
manufacturer, set E5-01 = FFFF.
◆ Subchart A-3: EZ Open Loop Vector Control Test Run Procedure
Subchart A-3 gives the setup procedure to run a PM motor in EZ Open Loop Vector Control.

YASKAWA CIPR-GA50C series Specifications

General

Brand	YASKAWA
Model	CIPR-GA50C series
Category	Controller
Language	English