3.2 Operating Procedures for Utility Functions
3.2.44 INDEXER Alarm History Display (FnB0D)
3-136
Operating Procedure
Step Operation Result
1
Press the key to open the Util-
ity Function Mode main menu, and
move the cursor with the
keys to select FnB0D.
2
Press the key to view the alarm
history.
If no alarms occur, “NONE” is dis-
played.
3
Use the keys to scroll the
alarm history.
4
Press the key to return to the
Utility Function Mode main menu.
To clear the alarm history, execute the Reset INDEXER Alarm
(FnB0C) utility function with Mode set to ALM History (clear
alarm history). The alarm history is not cleared when you reset
an alarm (Mode = ALM state) or when the control power sup-
ply to the SERVOPACK is turned OFF. Refer to the following
section for the procedure.
INDEXER Alarm Reset (FnB0C) on page 3-134
㹀㹀ࠉࠉࠉࠉࠉ㹄㹓㹌㹁㹒㹇㹍㹌
㹄㹬㹀㸮㹁ࠉ㸿㹊㹋ࠉ㹐㹣㹱㹣㹲
㹄㹬㹀㸮㹂ࠉ㹇㹬㹢㹣㹶㹣㹰ࠉ㸿㹊㹋
㹄㹬㸮㸮㸮ࠉ㸿㹪㹫ࠉ㹆㹧㹱㹲㹭㹰㹷
㹄㹬㸮㸮㸰ࠉ㹈㹍㹅
㹀㹀ࠉࠉࠉࠉࠉ㸿㹪㹫㹒㹰㹟㹡㹣
㸿㹊㹋㸮㸻㸿㸬㹄㸯㸮
㸿㹊㹋㸯㸻㹃㸯㸷㸿
㸿㹊㹋㸰㸻㹌㹍㹌㹃
㸿㹊㹋㸱㸻㹌㹍㹌㹃
㹀㹀ࠉࠉࠉࠉࠉ㸿㹪㹫㹒㹰㹟㹡㹣
㸿㹊㹋㸮㸻㸿㸬㹄㸯㸮
㸿㹊㹋㸯㸻㹃㸯㸷㸿
㸿㹊㹋㸰㸻㹌㹍㹌㹃
㸿㹊㹋㸱㸻㹌㹍㹌㹃
㹀㹀ࠉࠉࠉࠉࠉ㸿㹪㹫㹒㹰㹟㹡㹣
㸿㹊㹋㸯㸻㹃㸯㸷㸿
㸿㹊㹋㸰㸻㹌㹍㹌㹃
㸿㹊㹋㸱㸻㹌㹍㹌㹃
㸿㹊㹋㸲㸻㹌㹍㹌㹃
㹀㹀ࠉࠉࠉࠉࠉ㸿㹪㹫㹒㹰㹟㹡㹣
㸿㹊㹋㸴㸻㹌㹍㹌㹃
㸿㹊㹋㸵㸻㹌㹍㹌㹃
㸿㹊㹋㸶㸻㹌㹍㹌㹃
㸿㹊㹋㸷㸻㹌㹍㹌㹃
㹀㹀ࠉࠉࠉࠉࠉ㹄㹓㹌㹁㹒㹇㹍㹌
㹄㹬㹀㸮㹁ࠉ㸿㹊㹋ࠉ㹐㹣㹱㹣㹲
㹄㹬㹀㸮㹂ࠉ㹇㹬㹢㹣㹶㹣㹰ࠉ㸿㹊㹋
㹄㹬㸮㸮㸮ࠉ㸿㹪㹫ࠉ㹆㹧㹱㹲㹭㹰㹷
㹄㹬㸮㸮㸰ࠉ㹈㹍㹅
To Next Page
Loading...
Need help?
General
