xxiii
Storage Precautions
Transportation Precautions
Do not place an excessive load on the product during storage.
(Follow all instructions on the packages.)
There is a risk of injury or damage.
Do not install or store the product in any of the following loca-
tions.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed
product specifications
• Locations that are subject to relative humidities that exceed product
specifications
• Locations that are subject to condensation as the result of extreme
changes in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product
specifications
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the
product may fail or be damaged.
Transport the product in a way that is suitable to the mass of the
product.
Do not use the eyebolts on a SERVOPACK or Servomotor to
move the machine.
There is a risk of damage or injury.
When you handle a SERVOPACK or Servomotor, be careful of
sharp parts, such as the corners.
There is a risk of injury.
Do not place an excessive load on the product during transporta-
tion. (Follow all instructions on the packages.)
There is a risk of injury or damage.
To Next Page
Loading...
Need help?
General
