xxv
Do not install or store the product in any of the following loca-
tions.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed
product specifications
• Locations that are subject to relative humidities that exceed product
specifications
• Locations that are subject to condensation as the result of extreme
changes in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product
specifications
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the
product may fail or be damaged.
Use the product in an environment that is appropriate for the
product specifications.
If you use the product in an environment that exceeds product
specifications, the product may fail or be damaged.
A SERVOPACK or Servomotor is a precision device. Do not drop
it or subject it to strong shock.
There is a risk of failure or damage.
Always install a SERVOPACK in a control panel.
Do not allow any foreign matter to enter a SERVOPACK or a Ser-
vomotor with a Cooling Fan and do not cover the outlet from the
Servomotor’s cooling fan.
There is a risk of failure.