YASKAWA E-7 Series - Page 96

3.2 Operating Procedures for Utility Functions
3.2.13 Autotune Motor Current Detection Signal Offset (Fn00E)
3-34
Operating Procedure
Step Operation Result
1
Press the Key to display the
Utility Mode Main Menu, and then
use the Key or Key to
select Fn00E.
2
Press the Key.
The Fn00E (Autotune Motor Current
Detection Signal Offset) execution
display will appear.
3
Press the Key.
Note: Press the Key to cancel the
automatic adjustment. The dis-
play will return to the Utility Mode
Main Menu.
The offset of the motor current
detection signal will be automati-
cally adjusted.
When processing has been com-
pleted, the status display will flash
DONE for approximately one sec-
ond and then return to 1:BB.
1:BB
FUNCTION
Fn00D:MonGain Adj
Fn00E:Cur AutoAdj
Fn00F:Cur ManuAdj
Fn010:Prm Protect
1:BB
Auto Offs et-ADJ
of Motor Current
S tart : [DATA]
Return: [S ET]
1:BB
Auto Offs et-ADJ
of Motor Current
S tart : [DATA]
Return: [S ET]