YASKAWA FSDrive-MV1000 Series - Changing Parameter Settings or Values; Verifying Parameter Changes: Verify Menu

4.3 The Drive and Programming Modes
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions 117
Start-Up Programming & Operation
4
u Changing Parameter Settings or Values
Key operations are shown in the following using the Acceleration Time 1 (C1-01) for an example.
This example explains changing C1-01 (Acceleration Time 1) from 60.0 seconds (default) to 70.0 seconds.
u Verifying Parameter Changes: Verify Menu
The Verify Menu lists edited parameters from the Programming Mode or as a result of Auto-Tuning. The Verify Menu
helps determine which settings have been changed and is particularly useful when replacing a drive. If no settings have
been changed, the Verify Menu will read “nonE”. The Verify Menu also allows users to quickly access and re-edit any
parameters settings that have been changed.
Note: The Verify Menu will not display parameters from the A1 group (except for A1-02) even if those parameters have been changed
from their default settings.
Operating Procedure LCD Display
1
Press and hold to display the frequency reference screen.
2
Press or to display the Parameter Setting Mode screen.
3
Press to enter the parameter menu tree.
4
Select C1-01 by , , or , and press .
5
Press the , , or key and enter 0070.0.
6
Press and the drive will confirm the change.
Operating Procedure LCD Display
1 The control power supply is powered up. The initial display will appear.
2
Press or until the display shows the top of the Verify Menu.
3
Press to enter the list of parameters that have been edited from their original default
settings.
Press or displays the changed parameters.
Press or until C1-01 is displayed.
4
Press the key to access the setting value. Left digit flashes.
HELP
- MODE - PRG
DATA
Programming
FWD
←→
-PRMSET-
Initialization
Select Language
PRG
FWD
A1-00=0
F1
F2
“60.0sec”
F1
F2
“60.0sec”
Entry Accepted
- MODE - PRG
Modified Consts
HELP DATA
FWD
Modified
X Parameters
C1-01 = 20.0sec
(0.0~6000.0)
“60.0sec”
FWD
- VERIFY -
PRG
Home DATA
Accel Time 1
FWD
C1-01=0020.0sec
(0.0~6000.0)
“60.0sec”
- VERIFY - PRG
Home
DATA
Accel Time 1