YASKAWA FSDrive-MV1000 Series - Model Number and Nameplate Check; Nameplate

1.3 Model Number and Nameplate Check
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions 29
Receiving
1
1.3 Model Number and Nameplate Check
Please perform the following tasks after receiving the drive:
• Inspect the drive for damage.
If the drive appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate.
• If you have received the wrong model or the drive does not function properly, contact your supplier.
• Use a screwdriver or spanner to ensure that the screws and fastened parts are tightened. In particular, check the
tightening torque of all terminal screws on the electrical connections.
DANGER! If any parts in the drive are damaged or missing, stop the drive and contact your Yaskawa representative or the nearest
Yaskawa sales office. Electrical circuits could fail when current is applied, resulting in death, serious injury, or fire.
u Nameplate
The nameplate is affixed on the inside of the drive control panel door.
Example of the nameplate with standard specifications is shown in Figure 1.1.
Figure 1.1
Figure 1.1 Example Drive Nameplate
,#2#0
㧺㧼㧵㧿㧠㧝㧝㧞㧡㧙㧝
5'401
/#55
-I
&#6'
4#6'&+0276(4'37'0%;
4#6'&176276%744'06
4#6'&17627681.6#)'2*#5'#%
4#6'&+027681.6#)'2*#5'#%
%#2#%+6;
/1&'.%+/4/8
*\
#
M8
M8#
M8ޓ%.#55
Mass
Model
Capacity
Input voltage
Output voltage
Output current
Input frequency
Manufactured date
Serial number
Asia