YASKAWA FSDrive-MV1000 Series - Page 47

2.2 Mechanical Installation
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions 47
Mechanical Installation
2
Table 2.6 Transportation Procedure 1 (Class: 3 kV)
Transportation Procedure
1. Attach the wire ropes for lifting to the support hooks on the top of the panel to lift the drive.
Figure 2.5
Figure 2.5 Inserting Wire Ropes for Lifting
2. Ensure that the hanging angle is 45°±15°.
Wire ropes for lifting
Drive
Support hooks
(4 pieces)
Support hook
installation opening
Front view
Top view
Hanging angle
of 45°±15°
Pass the wire rope
through the support
hook while lifting it.