2.2 Mechanical Installation
50 YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
Table 2.9 Transportation Procedure 1 (Class: 4 kV)
Transportation Procedure
1. Attach the wire ropes for lifting to the support hooks on the top of the panel to lift the drive.
Figure 2.10
Figure 2.10 Inserting Wire Ropes for Lifting
2. Ensure that the hanging angle is 45°±15°.
Front view
Top view
Wire ropes for lifting
Drive
Hanging angle of 45°±15°
To Next Page
Loading...
