YASKAWA FSDrive-MV1000 Series - Page 52

2.2 Mechanical Installation
52 YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
Table 2.11 Transportation Procedure 1 (Class: 6 kV)
Transportation Procedure
1. Insert wire ropes for lifting through the support hook installation openings on the top of the drive.
Figure 2.13
Figure 2.13 Inserting Wire Ropes for Lifting
2. Ensure that the hanging angle is 45°±15°.
Wire ropes for lifting
Drive
Support hooks
(4 pieces)
Support hook
installation opening
Front view
Top view
Hanging angle
of 45°
±15°
Pass the wire rope
through the support
hook while lifting it.