2.6 Install the Keypad in a Control Panel or Another Device
44 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
A - Keypad
B - Mounting bracket A
C - M3 screws
D - Screw mounting hole
Figure 2.17 Attach Keypad to Mounting Bracket
4. Position the mounting bracket to which the keypad has been attached in the control panel, and mount it from
the outside using the screws.
Use the screws supplied with the installation support set, and tighten them to a tightening torque of 0.98 to
1.33 N∙m (8.67 to 11.77 in∙lb).
A - M4 screw B - Enclosure panel
Figure 2.18 Mount Mounting Bracket to the Interior of the Control Panel
To Next Page
Loading...
