YASKAWA SGD7S-****20A Series - Page 521

13.1 List of Servo Parameters
13.1.2 List of Servo Parameters
13-34
Pn82B
2
Option Field Allocations
2
0000h to
1F1Fh
–1D1Ch All
After
restart
Setup
*13
Pn82C
2
Option Field Allocations
3
0000h to
1F1Fh
–1F1Eh All
After
restart
Setup
*13
Continued on next page.
Continued from previous page.
Parameter
No.
Size
Name
Setting
Range
Setting
Unit
Default
Setting
Applicable
Motors
When
Enabled
Classi-
fication
Refer-
ence
M2
*14
n.X
V_PPI Allocation (Option)
0 Allocate bit 0 to V_PPI.
1 Allocate bit 1 to V_PPI.
2 Allocate bit 2 to V_PPI.
3 Allocate bit 3 to V_PPI.
4 Allocate bit 4 to V_PPI.
5 Allocate bit 5 to V_PPI.
6 Allocate bit 6 to V_PPI.
7 Allocate bit 7 to V_PPI.
8 Allocate bit 8 to V_PPI.
9 Allocate bit 9 to V_PPI.
A Allocate bit 10 to V_PPI.
B Allocate bit 11 to V_PPI.
C Allocate bit 12 to V_PPI.
D Allocate bit 13 to V_PPI.
E Allocate bit 14 to V_PPI.
F Allocate bit 15 to V_PPI.
n.X
V_PPI Allocation Enable/Disable Selection
0 Disable V_PPI allocation.
1 Enable V_PPI allocation.
n.X
P_PI_CLR Allocation (Option)
0 to F The settings are the same as for the V_PPI allocations.
n.X
P_PI_CLR Allocation Enable/Disable Selection
0 Disable P_PI_CLR allocation.
1 Enable P_PI_CLR allocation.
M2
*14
n.X
P_CL Allocation (Option)
0 to F The settings are the same as for the V_PPI allocations.
n.X
P_CL Allocation Enable/Disable Selection
0 Disable P_CL allocation.
1 Enable P_CL allocation.
n.X
N_CL Allocation (Option)
0 to F The settings are the same as for the V_PPI allocations.
n.X
N_CL Allocation Enable/Disable Selection
0 Disable N_CL allocation.
1 Enable N_CL allocation.