YASKAWA SGD7S-****20A Series - Page 522

13.1 List of Servo Parameters
13.1.2 List of Servo Parameters
13
Parameter Lists
13-35
Pn82D
2
Option Field Allocations
4
0000h to
1F1Ch
– 0000h All
After
restart
Setup
*13
Continued on next page.
Continued from previous page.
Parameter
No.
Size
Name
Setting
Range
Setting
Unit
Default
Setting
Applicable
Motors
When
Enabled
Classi-
fication
Refer-
ence
M2
*14
n.X
BANK_SEL1 Allocation (Option)
0 Allocate bits 0 to 3 to BANK_SEL1.
1 Allocate bits 1 to 4 to BANK_SEL1.
2 Allocate bits 2 to 5 to BANK_SEL1.
3 Allocate bits 3 to 6 to BANK_SEL1.
4 Allocate bits 4 to 7 to BANK_SEL1.
5 Allocate bits 5 to 8 to BANK_SEL1.
6 Allocate bits 6 to 9 to BANK_SEL1.
7 Allocate bits 7 to 10 to BANK_SEL1.
8 Allocate bits 8 to 11 to BANK_SEL1.
9 Allocate bits 9 to 12 to BANK_SEL1.
A Allocate bits 10 to 13 to BANK_SEL1.
B Allocate bits 11 to 14 to BANK_SEL1.
C Allocate bits 12 to 15 to BANK_SEL1.
n.X
BANK_SEL1 Allocation Enable/Disable Selection
0 Disable BANK_SEL1 allocation.
1 Enable BANK_SEL1 allocation.
n.X
LT_DISABLE Allocation (Option)
0 to F The settings are the same as for the V_PPI allocations.
n.X
LT_DISABLE Allocation Enable/Disable Selection
0 Disable LT_DISABLE allocation.
1 Enable LT_DISABLE allocation.