YASKAWA SGD7S-****20A Series - Page 545

13.3 Parameter Recording Table
13-58
Pn810 0
Exponential Acceleration/
Deceleration Bias
Immedi-
ately
*3
Pn811 0
Exponential Acceleration/
Deceleration Time Constant
Immedi-
ately
*3
Pn812 0 Movement Average Time
Immedi-
ately
*3
Pn814 100
External Positioning Final
Travel Distance
Immedi-
ately
*3
Pn816 0000h
Origin Return Mode Set-
tings
Immedi-
ately
*3
Pn817 50 Origin Approach Speed 1
Immedi-
ately
*3
Pn818 5 Origin Approach Speed 2
Immedi-
ately
*3
Pn819 100
Final Travel Distance for
Origin Return
Immedi-
ately
*3
Pn81E 0000h
Input Signal Monitor Selec-
tions
Immediately
Pn81F 0010h Command Data Allocations After restart
Pn820 0 Forward Latching Area Immediately
Pn822 0 Reverse Latching Area Immediately
Pn824 0000h Option Monitor 1 Selection Immediately
Pn825 0000h Option Monitor 2 Selection Immediately
Pn827 100
Linear Deceleration Con-
stant 1 for Stopping
Immedi-
ately
*3
Pn829 0
SVOFF Waiting Time (for
SVOFF at Deceleration to
Stop)
Immediately
Pn82A 1813h Option Field Allocations 1 After restart
Pn82B 1D1Ch Option Field Allocations 2 After restart
Pn82C 1F1Eh Option Field Allocations 3 After restart
Pn82D 0000h Option Field Allocations 4 After restart
Pn82E 0000h Option Field Allocations 5 After restart
Pn833 0000h Motion Settings After restart
Pn834 100
First Stage Linear Accelera-
tion Constant 2
Immedi-
ately
*3
Pn836 100
Second Stage Linear
Acceleration Constant 2
Immedi-
ately
*3
Pn838 0
Acceleration Constant
Switching Speed 2
Immedi-
ately
*3
Pn83A 100
First Stage Linear Decelera-
tion Constant 2
Immedi-
ately
*3
Pn83C 100
Second Stage Linear
Deceleration Constant 2
Immedi-
ately
*3
Pn83E 0
Deceleration Constant
Switching Speed 2
Immedi-
ately
*3
Pn840 100
Linear Deceleration Con-
stant 2 for Stopping
Immedi-
ately
*3
Pn842 0
Second Origin Approach
Speed 1
Immedi-
ately
*3
Pn844 0
Second Origin Approach
Speed 2
Immedi-
ately
*3
Continued on next page.
Continued from previous page.
Parameter
No.
Default Setting Name
When
Enabled