Revision History-1
Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
Date of
Publication
Rev.
No.
Web
Rev.
No.
Section Revised Contents
August 2017 <12> 0 Back cover Revision: Address
March 2017 <11> 0 Preface, 12.5 Partly revised.
4.4.3, 5.15.1 Addition: Information on SQ47 and SQ57 Linear Encoders from
Magnescale Co., Ltd.
5.15.1 Addition: Information on LIC2100-Series and LC415 Linear Encoders from
Heidenhain Corporation.
5.15.1, 5.17.2 Addition: Information on RESOLUTE Linear Encoders from Renishaw PLC.
5.19 Newly added.
6.1.2 Addition: Information on forcing outputs with MECHATROLINK-III commands
12.2.2, 13.1.2 Revisions: Reference information
Chapter 13 Addition: Pn56A and Pn56B
December 2016 <10> 0 Preface Partly revised.
1.4.2, 4.4.2,
4.4.3, 5.15.1,
5.16, 6.8
Addition: Information on Rotary Servomotors with 24-bit batteryless absolute
encoders.
Back cover Revision: Address
November 2016 <9> 0 Preface Partly revised.
1.5.2 Addition: Information on Direct Drive Servomotors (SGM7F-
A, -M,
-
N)
4.4.3, 5.15.1,
5.17.2
Addition: Information on Renishaw PLC EVOLUTE linear scales
September 2016 <8> 0 All chapters Addition: Information on Direct Drive Servomotors (SGM7E)
Preface Partly revised.
2.1.3, 4.2, 4.5 Revision: “Linear Servomotor overheat protection signal input” changed to
“overheat protection input.”
3.7 Addition: EMC installations for single-phase 200-VAC and single-phase 100-
VAC models
6.14, 8.12.3 Newly added.
Chapter 12 Addition: A.862 and A.93B
Chapter 13 Addition: Pn022, Pn475, Pn476, Pn61A, Pn61B, Pn61C, and Pn61D
14.2.2 Addition: Un02F
April 2016 <7> 0 All chapters Addition: Information on SGM7F Direct Drive Servomotors
Deletion: Information on SGLC Linear Servomotors
Preface, 9.1, 9.2 Partly revised.
2.1.1. Addition: Information on input current of control power supply
Chapter 13 Deletion: Pn52D
November 2015 <6> 0 All chapters Addition: Information on SERVOPACKs with single-phase, 100-VAC power sup-
ply inputs
Preface Revision: Information on certification for standards
4.4.3, 5.15.1,
6.5.1
Addition: Information on SQ10 Linear Encoder from Magnescale Co., Ltd.
MANUAL NO. SIEP S800001 28C <2>-1
Published in Japan September 2014
Date of publication
Revision number
WEB revision number