3.14 Number Key Customize Function
3-82
"
Display Allocation
Use this function is used in the key allocation (EACH) display.
*1
The selection dialog box is displayed.
*2
The character input status is entered.
*3
The reserved name input to the “ALLOCATION CONTENT” is displayed.
*4
A message “Reserved display registered” is displayed, and the display is registered.
Move the cursor to the “FUNCTION” of the key to be allocated Press [SELECT]
*1
Select “DISPLAY”
Move the cursor to “ALLOCATION CONTENT” Press
[SELECT]
*2
Input the name of the reserved display and press [ENTER]
*3
Open the
display for allocation
Press [INTERLOCK] and the allocated key at the same time
*4
The display allocation functions the same as the reserved display call function. Only one
display can be allocated to a key.
Operation
Explanation
KEY ALLOCATION(EACH)
APPLI.NO.:1
KEY FUNCTION ALLOCATION CONTENT
- INSTRUCTION DOUT
. JOB CALL 1
0 DISPLAY WORK POSITION DISP
1 MAKER
2 MAKER
3 MAKER
4 MAKER
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
NOTE
To Next Page
Loading...
