3 Creating Application Software
3.7 Changing Build Settings
3-6
HW1484528
HW1484528
3.7 Changing Build Settings
To change build settings, select “Build”, then “Build settings...” under the
menu.
The sample program in the DVD is created in the default installation folder
(C:Program Files\Yaskawa\MotoPlusIDE_YRCmicro). Thus, when it is
installed in another folder, the build settings must be initialized.
To initialize the build settings, check “Edit Enable/Disable” and click on the
button “Restore factory defaults”.
Also, compile options, build options, etc. can be changed by using
“Compile Code Command” or “Build Executable Command”, but basically,
use the default settings.
To Next Page
Loading...
