2 Development Environment Setup
2.2 Installation of Development Environment Software
2-2
HW1484528
HW1484528
2.2 Installation of Development Environment Software
Install MotoPlus IDE as indicated in the following procedure.
1. Insert the MotoPlusIDE installation DVD in the DVD slot on the PC.
If AutoRun is enabled, the installation starts.
If not, run “setup.exe” in the DVD.
2. Install MotoPlusIDE.
The installation window of the MotoPlusIDE appears.
3. Click 〔Next>〕.
The following window appears to specify the installation destination
folder.
To Next Page
Loading...
