5 Installation and Start-up of Application Program
5.1 Installation of Application Program in Maintenance Mode
5-1
HW1484528
HW1484528
5 Installation and Start-up of Application Program
5.1 Installation of Application Program in Maintenance Mode
1. Load function
Load the application program and install it by following the instructions
below.
(1) Set the security mode to the MANAGEMENT MODE. Select the
main menu {MotoPlus APL.}. Then {LOAD (USER APPLICA-
TION)}, {FILE LIST}, {DELETE}, {DEVICE}, {FOLDER}, and
{MotoPlus FUNC. SETTING} appear as submenus.
(2) Specify the file location.
Select an appropriate file location with the submenus {DEVICE (to
select SD/USB)} and {FOLDER (to select the folder which has the
application program)}.
(3) Select and load a file.
• Select the submenu {LOAD (USER APPLICATION)}. Then,
“*.out” files in the specified folder appear as shown below.
To Next Page
Loading...
