Yealink CP960 - Barging in an Active Call by BLF List Key; Shared Line; State Indicator of Shared Line

Yealink CP960 User Guide
108
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Tap the desired BLF List key to retrieve a call that is parked to the monitored line.
Barging In an Active Call by BLF List Key
You can use the BLF List key to barge in a conversation and set up a conference call.
Before You Begin
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Tap the BLF List key.
The IP phone dials out the barge-in code followed by the monitored line, and then you can join the call. Each of
the three parties can hear the other two parties.
Shared Line
Yealink IP phone supports using Shared Call Appearance (SCA) to share a line. So that this line can be registered on
more than one IP phone at the same time.
Your system administrator can set your phone to use the shared line.
Note
Check with your system administrator to find out if SCA is available on your phone.
Topics
State Indicator of Shared Line
Placing Calls on a Shared Line
Answering Calls on a Shared Line
Placing a Call on Public Hold
Placing a Call on Private Hold
Retrieving a Held Call Remotely on a Shared line
Barging In an Active Call on a Shared line
Pulling a Shared Call on a Shared line
State Indicator of Shared Line
Your system administrator may assign multiple line keys to associate with a shared line, which enhances call visu-
alization and simplifies call handling. Incoming calls to this shared line or outgoing calls from this shared line will be
distributed evenly among the available line keys.
The shared line is indicated by different line key icons:
In the following figure, the shared line is indicated by different line key icon: