Call Features
81
Tap Transfer to complete the transfer. (The call will automatically dial out in about 5 seconds if you do not tap
Transfer.)
l
Tap , and then select the desired contact to complete the transfer.
l
Tap , and then select the desired list. Tap the desired entry to complete the transfer.
Performing a Semi-Attended/Attended Transfer
You can transfer calls to other contacts immediately when receiving ringback or after consulting with them first.
Procedure
1. Tap More->Transfer during a call.
2. Do one of the following:
l Enter the number you want to transfer the call to.
Tap Transfer->Send to dial out.
l
Tap , and then select the desired contact group and tap the desired contact to dial out.
l
Tap , and then select the desired list. Tap the desired entry to dial out.
3. Do one of the following:
l When you hear the ringback tone, tap Transfer to finish a semi-attended transfer.
l After the contact answers the call, tap Transfer to finish an attended transfer (consultative transfer).
Related Topics
Setting a Speed Dial Key Manually
Conference Calls
The Yealink IP phones support a five-way local conference and multi-way network conference.
Note
Network conference is not available on all servers. Check with your system administrator to find out if it is available on your
phone.
Topics
To Next Page
Loading...
