Yealink CP960 - Receiving Multicast Paging; Managing a Paging Call

Call Features
95
Receiving Multicast Paging
Your system administrator has set a listening paging group for you, and then you can receive a paging call when the
phone is idle. The paging call is automatically answered on your phone.
When there is a voice call or a paging call in progress, the phone handles the new paging call differently according to
the multicast listening settings configured by your system administrator.
Managing a Paging Call
During a paging call, you can do the following:
l Tap More->Hold to place the current paging call on hold.
The paging call is placed on hold and the receiver releases the session.
l
Tap More->Resume or to resume the held paging call.
The multicast RTP session is re-established.
l Tap DND to enable or disable DND mode.
l Tap Mute to mute the multicast RTP session.
l Tap to record a call.
l Tap End Call to end the paging call.