Yealink CP960 - Activating the Bluetooth Mode; Deactivating the Bluetooth Mode; Pairing and Connecting the Bluetooth-Enabled Mobile Phone

Yealink CP960 User Guide
44
Configuring the Media Audio Feature
Renaming the Paired Bluetooth-enabled Mobile Phone
Making the IP Phone Discoverable
Editing Device Name of Your Phone for Recognition
Unpairing the Mobile Phone
Disconnecting the Bluetooth-enabled Mobile Phone
Activating the Bluetooth Mode
Procedure
1. Do one of the following:
l Swipe down from the top of the screen to enter the control center.
l Tap
.
l From the home screen, navigate to Settings->Basic Settings->Bluetooth.
2. Turn on the Bluetooth.
The IP phone scans the available Bluetooth device automatically.
The touch screen displays the Bluetooth icon.
Deactivating the Bluetooth Mode
You can deactivate the Bluetooth mode when you no longer use a Bluetooth device.
Procedure
1. Do one of the following:
l Swipe down from the top of the screen to enter the control center.
l Tap .
l From the home screen, navigate to Settings->Basic Settings->Bluetooth.
2. Turn off the Bluetooth.
The Bluetooth icon disappears from the status bar.
Pairing and Connecting the Bluetooth-enabled Mobile Phone
You can pair up with countless mobile phones with your IP phone but only one mobile phone can be connected at a
time. After connection, the IP phone will automatically find an available line key and assign the line key for Mobile
Account. The Mobile Account key’s default label is “My Mobile”. If there is no available line key, you can assign it
manually.
Before You Begin
Make sure that the Bluetooth-enabled mobile phone is discoverable.
Procedure
1. Navigate to Settings->Basic Settings->Bluetooth.
2. Tap
to search for the mobile phone.
3. Tap the desired Bluetooth-enabled mobile phone to connect to the mobile phone.
4. Tap Pair on both mobile phone and IP phone.
The connection will be completed successfully with a prompt appears under the Bluetooth-enabled mobile phone
name.