Yealink CP960 - Unpairing the Mobile Phone

Customizing Your Phone
49
4.
Tap
.
You should make your IP phone discoverable first, and then the pre-configured Bluetooth device name will display in
scanning list of another device.
Related Topics
Activating the Wi-Fi Mode
Making the IP Phone Discoverable
Unpairing the Mobile Phone
You can unpair your mobile phone with your IP phone. When you unpair the mobile phone, the mobile phone inform-
ation disappears from the Paired devices list. To connect the mobile phone to your IP phone again, tap the desired
mobile phone in the Available devices list.
Procedure
1. Do one of the following:
l Tap .
l Swipe down from the top of the screen to enter the control center.
Long tap Bluetooth.
l Navigate to Settings->Basic Settings->Bluetooth.
The touch screen shows the paired and connected Bluetooth device.
2. Tap
after the connected mobile phone name.
3. Tap Unpair.